Author |
Message |
   
rvz
Unregistered guest
| Posted on Thursday, July 31, 2003 - 07:17 am: | |
If anyone has an old CT tail kit they're not going to use, drop me an email, I'd like to take it off your hands. Thanks, Bob
|
   
Jeff Turner
Unregistered guest
| Posted on Wednesday, October 15, 2003 - 10:31 pm: | |
I have one that we may be selling soon. Original CT w/2 sets of wings ...one of which is being upgraded with all of the new roller bearings for all controls in the wings vs. the "old" teflon bearings. The wings only need to be plumbed (lines run)for the fuel system (currently set-up as single tanks in each wing)fuel probes are installed. The control surfaces need to be built. The fuselage is complete and just waiting for the wings to be completed so it can stand on it's own legs. I have all other parts to complete exept for wheel pants. I also have an IO-520D (300hp) with 43 hours on it that will be for sale also. |
   
Phil & Margie Hodge
New member Username: N410mp
Post Number: 8 Registered: 01-2000
| Posted on Thursday, October 16, 2003 - 06:14 pm: | |
I'm also looking for a CT tail, but just the tail portion and not to fly. My grass runway is adjacent, perpendicular to, and 40' above, a four lane highway. We would love to mount a non-functional tail into the bank, just below runway height. "Cuation, low flying aircraft!" If anyone has any applicable spare parts please let me know. |
   
Tom R. Hutchison
New member Username: Tomhutch
Post Number: 131 Registered: 01-2003
| Posted on Thursday, October 16, 2003 - 07:24 pm: | |
You're a sick man!
 |
   
Jim Oyler
New member Username: Midniteoyl
Post Number: 38 Registered: 07-2003
| Posted on Thursday, October 16, 2003 - 07:49 pm: | |
Just make sure you place a crushed car in front of the tail...  |
   
Phil & Margie Hodge
New member Username: N410mp
Post Number: 9 Registered: 01-2000
| Posted on Thursday, October 16, 2003 - 07:50 pm: | |
Thankyou! |
   
CBROS Unregistered guest
| Posted on Thursday, October 16, 2003 - 07:53 pm: | |
Don't put your tail number on it!! |