Author |
Message |
   
Bill Copeland
| Posted on Friday, September 24, 1999 - 08:13 pm: | |
I am posting this message on behalf of two builders who have inquired about the availabilty of EDI Steel main gear legs and an Original Wheeler nose gear strut complete with spindle and "T" bracket and fork. If you have any of these items that are available for sale, give me a "holler". Bill C. |
   
Jay Villalva
| Posted on Monday, November 08, 1999 - 09:31 am: | |
I have a set of EDI steel gear with original Wheeler hardware. The hardware would need to be adapted, if used. I do have the nose gear also, it has the 1/8" thick down tube. Larry is able to reinforce the gear in the area of the spindle. There is concern about the strength of the 1/8" nose gear and since I'm installing the OI-540 (heavy) engine, I'm wanting to put the heavier nose gear in that EAC is offering. I also have an original Wheeler Lycoming OI-360 engine mount. |
   
waynepearce
| Posted on Monday, November 08, 1999 - 05:01 pm: | |
Jay I would like to talk with you about these items please call me at 864-306-3448 wayne. I would have gladly called but had no number |
|