Rudder pedals Log Out | Topics | Search
Moderators | Register | Edit Profile

Express Builders Forum » Classifieds » Rudder pedals « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff Dingbaum
New member
Username: Aviators

Post Number: 14
Registered: 12-2000
Posted on Wednesday, November 26, 2003 - 01:34 pm:   

Anyone out there have the old Wheeler style rudder
pedals? For some reason my kit only came with one
set. I don't think that they are interchangable left to right or I would get 2 new ones and have Wheeler on my left foot and Express on my right foot! Given that, I would prefer to have the
original pedals with Wheeler cast into them. I
also need the support tubes, but I can get that
at Express if you don't have them. Ditto with the
brake cylinders. Thanks, Jeff
Top of pagePrevious messageNext messageBottom of page Link to this message

Allyn J. Roe
New member
Username: Allynroe

Post Number: 1
Registered: 11-2003
Posted on Thursday, November 27, 2003 - 11:14 pm:   

Jeff,

We have a old Wheeler set; didn't think about it when we were on the phone. Call me Monday.
Top of pagePrevious messageNext messageBottom of page Link to this message

Allyn J. Roe
New member
Username: Allynroe

Post Number: 2
Registered: 11-2003
Posted on Thursday, November 27, 2003 - 11:14 pm:   

Jeff,

We have an old Wheeler set; didn't think about it when we were on the phone. Call me Monday.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jim Ward
New member
Username: Jehward

Post Number: 6
Registered: 02-2000
Posted on Sunday, November 30, 2003 - 01:44 pm:   

Jeff:
I had the same situation, and have done exactly as you said "Wheeler(L)- Express(R)" on both pilot and co-pilot sides. Worked fine! There were ears on each side of the pedals for the brake system. One gets used, the other gets ground off. That makes them interchangeable between the left and right feet. Not sure if the current Express pedals are the same.
Top of pagePrevious messageNext messageBottom of page Link to this message

Charles M. Robinson
New member
Username: F15epilot

Post Number: 15
Registered: 02-2004
Posted on Thursday, May 06, 2004 - 08:24 am:   

The Auriga I'm finishing was fitted with Cessna pedals. They work, but hanging the 'real' express pedals would be a marked improvement. I'm guessing the pedals above are long gone. Does anyone have a set of Express or Wheeler pedals they don't need. Please email me directly if you do.

Thanks

Chuck
Top of pagePrevious messageNext messageBottom of page Link to this message

Charles M. Robinson
New member
Username: F15epilot

Post Number: 25
Registered: 02-2004
Posted on Friday, July 02, 2004 - 03:09 pm:   

Another 'ping' to the system. Still looking for a set of rudder pedals. These C-types just eat up too much leg room (and I'm 6' 2"). Please email me if you know of a set. Thanks

Chuck
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff Dingbaum
New member
Username: Aviators

Post Number: 22
Registered: 12-2000
Posted on Friday, July 02, 2004 - 03:17 pm:   

Chuck,
Give Express a call. They have them. I just got one. I wanted to see if I liked the Wheeler on one pedal and express on the other. I do, so I'm ordering another right foot after the holidays. I think that they're about $15 each.

Jeff
Top of pagePrevious messageNext messageBottom of page Link to this message

Carter A. Smith
New member
Username: Carter_smith

Post Number: 8
Registered: 07-2004
Posted on Monday, November 01, 2004 - 07:09 pm:   

Does anyone have a set of rudder pedals (4) for the Express 2000? They didn't come with my kit and I would really like to have the factory style, especially since there's no factory.
Top of pagePrevious messageNext messageBottom of page Link to this message

Charles M. Robinson
New member
Username: F15epilot

Post Number: 36
Registered: 02-2004
Posted on Tuesday, November 02, 2004 - 09:05 am:   

If quantity helps, I could use the entire rudder pedal assembly that goes under the dash, at least the pedals, brackets, master cylinders, and pulleys. I have a set of C-1xx pedals mounted on the floor and I'd like to move them forward to the firewall for leg room.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: