Author |
Message |
   
Jim Oyler
New member Username: Midniteoyl
Post Number: 47 Registered: 07-2003
| Posted on Monday, November 03, 2003 - 01:03 am: | |
Not sure who has what model Prop here, but theres a new AD out for Hartzell Composite props http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/D499649195D 1D9F886256DCE0059B622?OpenDocument Jim |
   
JD Unregistered guest
| Posted on Monday, November 03, 2003 - 12:12 pm: | |
I believe this AD is primarily for the big composite props found on PT6A-67R powered birds (Short Bros primarily). - JD |
   
Jim Oyler
New member Username: Midniteoyl
Post Number: 48 Registered: 07-2003
| Posted on Monday, November 03, 2003 - 04:26 pm: | |
Good to know - as I had no clue as to who owns what. Also was fo just a little 'FYI' for Hartzell composite owners in general. Thx Jim
|
   
Martin Vandenbroek
New member Username: Martin
Post Number: 2 Registered: 05-2003
| Posted on Friday, November 14, 2003 - 12:30 pm: | |
FADEC continental IO-550 for MOGAS As aviationfuel is very expensive in Europe we ask the develloper of the fadec system if it is possible to run a fadec equiped engine on MOGAS. They told us that this is no problem the only thing they have to do is remapping the computer. They have not done it sofar but it will only take a few days work to run it on a testbench. Good news for all the guys in Europe. We are waiting for delivery of our 2000RG to The Netherlands which will be shipped to us soon. Martin vandenBroek
|
   
Martin Vandenbroek
New member Username: Martin
Post Number: 3 Registered: 05-2003
| Posted on Friday, November 14, 2003 - 12:34 pm: | |
FADEC continental IO-550 for MOGAS As aviationfuel is very expensive in Europe we ask the develloper of the fadec system if it is possible to run a fadec equiped engine on MOGAS. They told us that this is no problem the only thing they have to do is remapping the computer. They have not done it sofar but it will only take a few days work to run it on a testbench. Good news for all the guys in Europe. We are waiting for delivery of our 2000RG to The Netherlands which will be shipped to us soon. Martin vandenBroek
|